↑戻る Home↑
IR Laser System
Diode / DPSS Laser Mounting Option
IR Laser System Mounting option
DPSS CW
Q-switch AOM Q-switch
Fiber Coupling System
IR Laser System Fiber Coupling Laser System
  • CW, Q-switched, AOM Q-switched
  • λ: 710nm - 1550nm
  • Diode Laser, Single/Multi Mode
  • DPSS Laser, TEMoo ~95%
  • Internal Temperature Stablizer
  • Stable Output Power
  • Optional Circular Optics
  • On/Off Key Lock Switch
  • LED Emission Indicator
  • Function Panel Display
  • Optional Fiber Coupling
  • Optional Computer Interface
  • Wide Operating Temperature
  • CDRH Complied
  • Other λ and power are available upon request
  • AOM (Built-in Acousto-Optic Q-switched modulator) Laser System
    Item No. λ (nm) Pulse Energy (at 1KHz) Pulse Duration (at 1KHz) Max. Pulse Repetition Rate
    ISQAOM064-100 1064 100 µJ < 10 nsec 10 KHz
    ISQAOM064-50 1064 50 µJ < 10 nsec 10 KHz
    ISQAOM053-200 1053 200 µJ < 10 nsec 10 KHz

    CW Laser System
    Item No. λ (nm) Po (mw) max. Beam diameter (mm) Beam Divergence (mrad) Pout Stability/hr Mode
    IS550-90 1550 90 Adjustable 2.0 2% Single
    IS550-30 1550 30 Adjustable 2.0 2% Single
    IS550-20 1550 20 Adjustable 2.0 2% Single
    ISF340-200P 1340 200 1.5 1.5 2% TEMoo
    ISF340-300P 1340 300 1.5 1.5 2% TEMoo
    IS300-20 1300 20 Adjustable 2.0 2% Single
    IS064-10 1064 10 1.2 1.2 10% TEMoo
    ISF064-10P 1064 10 1.0 1.2 2% TEMoo
    IS064-20 1064 20 1.2 1.2 10% TEMoo
    IS064-50 1064 50 1.2 1.2 10% TEMoo
    IS064-75 1064 75 1.2 1.2 10% TEMoo
    ISF064-100P 1064 100 1.0 1.2 2% TEMoo
    ISF064-300P 1064 300 1.5 1.0 2% TEMoo
    ISF064-750P 1064 750 1.5 1.0 2% TEMoo
    ISF064-1000P 1064 1000 1.5 1.6 2% TEMoo
    ISF053-300P 1053 300 1.5 1.0 2% TEMoo
    IS980-30 980 30 Adjustable 2.0 2% Single
    IS980-30C 980 30 Circular Beam Adjustable 2.0 2% Single
    IS980-70 980 70 Adjustable 2.0 2% Single
    IS980-70C 980 70 Circular Beam Adjustable 2.0 2% Single
    IS980-400 980 400 Adjustable - 2% Multi
    IS840-170 840 170 Adjustable - 2% Multi
    IS840-400 840 400 Adjustable - 2% Multi
    IS830-100C 830 100 Circular Beam Adjustable 2.0 2% Single
    IS830-130 830 130 Adjustable 2.0 2% Single
    IS808-100C 808 100 Circular Beam Adjustable 2.0 2% Single
    IS808-130 808 130 Adjustable 2.0 2% Single
    IS808-170 808 170 Adjustable - 2% Multi
    IS808-400 808 400 Adjustable - 2% Multi
    IS808-1000 808 1000 Adjustable - 2% Multi
    IS785-25 785±5 25 Adjustable 2.0 5% single
    IS785-50 785±5 50 Adjustable 2.0 5% single
    IS785-70C 785±5 70 Circular Beam Adjustable 2.0 5% single
    IS785-100 785±5 100 Adjustable 2.0 5% single

    Item No.: ISQAOM064-100

    AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
    AOM Q-switched System
    Heat Sink Fan
    DC Driver/Controller

    • Q-Switched with AOM, ext./int. triggering, CW
    • Wavelength: 1064 nm
    • Pulse energy at 1 KHz: > 100 µJ
    • Pulse energy at 10 KHz: > 40 µJ
    • Average Pout (at 10 KHz): > 400 mw
    • Pulse Repetition Rate:
      • external triggering: 0 - 10 KHz
      • internal triggering: 0.01 - 10 KHz
    • Pulse Duration at 1 KHz: < 10 ns
    • Pulse Duration at 10 KHz: < 20 ns
    • Beam Divergence (Half angle 1/e2): 0.8 mrad
    • Beam Diameter: 1.5 mm
    • Polarization: linear > 100:1, Vertical (Optional horizontal)
    • Laser head size: 55 x 90 x 299mm
    • Function panel display
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (95 x 252 x 252mm)
    • Cable length: 52 inches (132cm)
    • Laser Head Heating Power, W: < 50
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 66 x 90 x 185 mm
    • Input Voltage: 24 VDC, < 100W

    Item No.: ISQAOM064-50

    AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
    AOM Q-switched System
    Heat Sink Fan
    DC Driver/Controller

    • Q-Switched with AOM, ext./int. triggering, CW
    • Wavelength: 1064 nm
    • Pulse energy at 1 KHz: > 50 µJ
    • Pulse energy at 10 KHz: > 20 µJ
    • Pulse Repetition Rate: 10 KHz
      • external triggering: 0 - 10 KHz
      • internal triggering: 0.01 - 10 KHz
    • Beam Divergence (Half angle 1/e2): 0.8 mrad
    • Beam Diameter: 1.5 mm
    • Polarization: linear > 100:1, Vertical (Optional horizontal)
    • Laser head size: 55 x 90 x 299mm
    • Function panel display
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supplysupply
      (95 x 252 x 252mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 66 x 90 x 185 mm
    • Input Voltage: 24 VDC, < 100W

    Item No.: ISQAOM053-200

    AOM - High Speed Q-Switched via Acousto-Optic Modulator Laser
    AOM Q-switched System
    Heat Sink Fan
    DC Driver/Controller

    • Q-Switched with AOM, ext./int. triggering, CW
    • Wavelength: 1053 nm
    • Pulse energy at 1 KHz: > 200 µJ
    • Pulse Repetition Rate: 10 KHz
      • external triggering: 0 - 10 KHz
      • internal triggering: 0.01 - 10 KHz
    • Beam Divergence (Half angle 1/e2): 0.8 mrad
    • Beam Diameter: 1.5 mm
    • Polarization: linear > 100:1, Vertical (Optional horizontal)
    • Laser head size: 55 x 90 x 299mm
    • Function panel display
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supplysupply
      (95 x 252 x 252mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 66 x 90 x 185 mm
    • Input Voltage: 24 VDC, < 100W

    Item No.: ISF340-100P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 1340 nm
    • Output Power: 100 mw
    • Beam Divergence (Half angle 1/e2): 1.0 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.1 mrad
    • Laser head size: 46 x 90 x 225 mm
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • Function panel display
    • Adjustable output power via digital controller with 1 mw resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: ISF340-200P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 1340 nm
    • Output Power: 200 mw
    • Beam Divergence (Half angle 1/e2): 1.0 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.1 mrad
    • Laser head size: 46 x 90 x 225 mm
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • Function panel display
    • Adjustable output power via digital controller with 1 mw resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: ISF340-300P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 1340 nm
    • Output Power: 300 mw
    • Beam Divergence (Half angle 1/e2): 1.0 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.1 mrad
    • Laser head size: 46 x 90 x 225 mm
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • Function panel display
    • Adjustable output power via digital controller with 1 mw resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: IS550-90

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1550 nm
    • Output Power: 90 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.5A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS550-30

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1550 nm
    • Output Power: 30 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS550-20

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1550 nm
    • Output Power: 20 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS300-20

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1300 nm
    • Output Power: 20 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: ISF064-10P

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1064 nm
    • Output Power: 10 mw
    • Beam Divergence (Half angle 1/e2): 0.5 mrad
    • Beam Diameter: 1.2 mm
    • Line Width: < 0.4 nm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS064-10

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1064 nm
    • Output Power: 10 mw
    • Beam Divergence (Half angle 1/e2): 0.5 mrad
    • Beam Diameter: 1.2 mm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 10%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS064-20

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1064 nm
    • Output Power: 20 mw
    • Beam Divergence (Half angle 1/e2): 0.5 mrad
    • Beam Diameter: 1.2 mm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 10%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS064-50

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1064 nm
    • Output Power: 50 mw
    • Beam Divergence (Half angle 1/e2): 0.5 mrad
    • Beam Diameter: 1.2 mm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 10%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS064-75

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1064 nm
    • Output Power: 75 mw
    • Beam Divergence (Half angle 1/e2): 0.5 mrad
    • Beam Diameter: 1.2 mm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 10%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: ISF064-100P

    CW Laser
    CW Laser System
    power supply

    • CW
    • Wavelength: 1064 nm
    • Output Power: 100 mw
    • Beam Divergence (Half angle 1/e2): 0.5 mrad
    • Beam Diameter: 1.2 mm
    • Line Width: < 0.4 nm
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 750mA
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: ISF064-300P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 1064 nm
    • Output Power: 300 mw
    • Beam Divergence (Half angle 1/e2): 0.8 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.1 mrad
    • Laser head size: 46 x 90 x 225 mm
    • Power Stability: < 2%
    • Linewidth: < 0.2 nm
    • Noise frequency range: < 2% RMS (10Hz - 20MHz)
    • Coherence length: < 10 mm
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • LED front panel power level display
    • Adjustable output power via digital controller with 1 mw resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Analog / Digital Modulation Control: 50 - 1000 Hz
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: ISF064-750P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 1064 nm
    • Output Power: 750 mw
    • Beam Divergence (Half angle 1/e2): 1.0 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.1 mrad
    • Laser head size: 46 x 90 x 225 mm
    • Power Stability: < 2%
    • Linewidth: < 0.2 nm
    • Noise frequency range: < 2% RMS (10Hz - 20MHz)
    • Coherence length: < 10 mm
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • LED front panel power level display
    • Adjustable output power via digital controller with 1 mw resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Analog / Digital Modulation Control: 50 - 1000 Hz
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: ISF064-1000P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 1064 nm
    • Output Power: 1 W
    • Beam Divergence (Half angle 1/e2): 1.0 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.1 mrad
    • Laser head size: 46 x 90 x 225 mm
    • Power Stability: < 2%
    • Linewidth: < 0.2 nm
    • Noise frequency range: < 2% RMS (10Hz - 20MHz)
    • Coherence length: < 10 mm
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • LED front panel power level display
    • Adjustable output power via digital controller with 1 mw resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: ISF053-300P

    CW Laser
    CW Laser System
    power supply
    DC Driver

    • CW
    • Wavelength: 1053 nm
    • Output Power: 300 mw
    • Beam Divergence (Half angle 1/e2): 0.8 mrad
    • Beam Diameter: 1.5 mm
    • Beam Pointing Stability: < 0.1 mrad
    • Laser head size: 46 x 90 x 225 mm
    • Power Stability: < 2%
    • Polarization: linear > 100:1, Horizontal (Optional vertical)
    • Laser head size: 46 x 90 x 225mm
    • LED front panel power level display
    • Adjustable output power via digital controller with 1 mw resolution
    • Optional Analog / Digital Modulation Control: 50 - 1000 Hz: $495.00
    • Internal over heat automatic shut off
    • Microprocessor controlled laser driver/power supply
      (90 x 260 x 197mm)
    • Cable length: 52 inches (132cm)
    • Operating Voltage: 115+/-20% VAC - 230+/-15% VAC
      50 - 60Hz (selectable)
    • Optional DC Driven Laser Driver/Controller
    • Size: 44 x 65 x 173 mm
    • Input Voltage: 12 VDC, < 100W

    Item No.: IS980-30

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 980 nm
    • Output Power: 30 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS980-30C

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 980 nm
    • Output Power: 30 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Circular Beam, Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3A
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS980-70

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 980 nm
    • Output Power: 70 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS980-70C

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 980 nm
    • Output Power: 70 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Circular Beam, Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS980-400

    CW Laser
    CW Laser System
    power supply

    • CW, multi-mode
    • Wavelength: 980 nm
    • Laser Diode Output Power: 400 mw
    • Beam Divergence: Multi-mode
    • Beam Diameter: Adjustable, output beam with high divergence (approx. 4 x 8 mrad). The beam profile may be set into line or rectangular shape.
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.8A
    • Mounting Option
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 3.0A

    Item No.: IS840-170

    CW Laser
    CW Laser System
    power supply

    • CW, molti-mode
    • Wavelength: 840 nm
    • Laser Diode Output Power: 170 mw
    • Beam Divergence: Multi-mode
    • Beam Diameter: Adjustable, output beam with high divergence (approx. 4 x 8 mrad). The beam profile may be set into line or rectangular shape.
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.4mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS840-400

    CW Laser
    CW Laser System
    power supply

    • CW, multi-mode
    • Wavelength: 840 nm
    • Laser Diode Output Power: 400 mw
    • Beam Divergence: Multi-mode
    • Beam Diameter: Adjustable, output beam with high divergence (approx. 4 x 8 mrad). The beam profile may be set into line or rectangular shape.
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.8A
    • Mounting Option
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 3A

    Item No.: IS830-100C

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 830 nm
    • Output Power: 100 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Circular Beam, Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS830-130

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 830 nm
    • Output Power: 130 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS808-100C

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 808 nm
    • Output Power: 100 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Circular Beam, Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS808-130

    CW Laser
    CW Laser System
    power supply

    • CW, single mode
    • Wavelength: 808 nm
    • Output Power: 130 mw
    • Beam Divergence (Half angle 1/e2): 2.0 mrad
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS808-170

    CW Laser
    CW Laser System
    power supply

    • CW, multi-mode
    • Wavelength: 808 nm
    • Laser Diode Output Power: 170 mw
    • Beam Divergence: Multi-mode
    • Beam Diameter: Adjustable, output beam with high divergence (approx. 4 x 8 mrad). The beam profile may be set into line or rectangular shape.
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.3mA
    • Mounting Option
    • Power Supply: 26 x 41 x 55 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1,6A

    Item No.: IS808-400

    CW Laser
    CW Laser System
    power supply

    • CW, multi-mode
    • Wavelength: 808 nm
    • Laser Diode Output Power: 400 mw
    • Beam Divergence: Multi-mode
    • Beam Diameter: Adjustable, output beam with high divergence (approx. 4 x 8 mrad). The beam profile may be set into line or rectangular shape.
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 1.8A
    • Mounting Option
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 3A

    Item No.: IS808-1000

    CW Laser
    CW Laser System
    power supply

    • CW, multi-mode
    • Wavelength: 808 nm
    • Laser Diode Output Power: 1 W
    • Beam Divergence: Multi-mode
    • Beam Diameter: Adjustable, output beam with high divergence (approx. 4 x 8 mrad). The beam profile may be set into line or rectangular shape.
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 2%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 2.3A
    • Mounting Option
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 3A

    Item No.: IS785-25

    CW Laser
    CW System
    Heat Sink Fan

    • CW, single mode
    • Wavelength: 785 nm
    • Laser Diode Output Power: 25 mw
    • Beam Divergence: 2.0
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 5%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 350mA
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1.6A

    Item No.: IS785-50

    CW Laser
    CW System
    Heat Sink Fan

    • CW, single mode
    • Wavelength: 785 nm
    • Laser Diode Output Power: 50 mw
    • Beam Divergence: 2.0
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 5%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 350mA
    • Mounting Option
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1.6A

    Item No.: IS785-70C

    CW Laser
    CW System
    Heat Sink Fan

    • CW, single mode
    • Wavelength: 785 nm
    • Laser Diode Output Power: 70 mw
    • Beam Divergence: 2.0
    • Beam Diameter: Circular Beam, Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 5%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 350mA
    • Mounting Option
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1.6A

    Item No.: IS785-100

    CW Laser
    CW System
    Heat Sink Fan

    • CW, single mode
    • Wavelength: 785 nm
    • Laser Diode Output Power: 100 mw
    • Beam Divergence: 2.0
    • Beam Diameter: Adjustable
    • Laser head size: 45 x 60 x 120mm
    • Power Stability: < 5%
    • Output power adjustable: Option
    • Modulation Control (up to 5KHz): Option
    • Modulation Control (up to 50KHz): Option
    • Key lock switch
    • LED emission indicator on/off switch
    • Operating Voltage: 5VDC / Max. 350mA
    • Mounting Option
    • Power Supply: 37.5 x 54.0 x 94.5 mm
      • Input: 100 - 240 VAC, 50 - 60Hz
      • Ouput: 5VDC, Max. 1.6A
    商品に関するお問い合わせ、その他ご質問・御要望は → 株式会社キーストンインターナショナル